Spray Ball Technical Data Special Spray Ball Installation Depth Test Stand / Drawings Fairs / Exhibitions

spray balls for CIP of tanks an containers directly from the manufacturer

standard material type: 1.4404 / 316L (1.4571 / 316Ti and others available)

SpruehkoepfeWe produce spray balls in stainless steel for the CIP-cleaning of containers and tanks worldwide

Our current product range includes the following nominal sizes:
DN 8, DN 10, DN 15, DN 20, DN 25, DN 40 and DN 50, each in 4 spraying angles:

  • 360° perigon spraying
  • 270° spraying angle upwards with drainage hole
  • 180° semi-spraying angle upwards with drainage hole and
  • 180° semi-spraying angle downwards

We also offer custom-built special spray balls, for example with internal screw thread G1/4“, G1/2“, G3/4“, G3/8“, G1“, G1 1/2“, G2“.


The Spray Ball

  • Is used for low-pressure interior cleaning of containers, tanks, vessels and machines of all kinds.

  • The cleaning effect is reached by an intensive wetting and rinsing of the container walls and can be intensified and shortened by adding detergents.

  • As standard, the sprayball is equipped with a spring clip or a split pin; it has an annular gap between stud and pipe for cleaning the connection pipe.

  • Suitable for pipes according to DIN 11850, series 1 also in series 2 possible.

 

Surface of the spray balls:

As standard we deliver our spray balls slurred with a roughnes:

  • outside: Ra 0,2 - 0,3 mμ.

If desired you can get an electro polished version.

Are you looking for the ideal solution for the spraying of disinfectant and cleaning agents for tank cleaning?

 

We look forward to hearing from you!

Burkhard Vertriebs GmbH | Julius-Probst-Straße 7 | D-87600 Kaufbeuren | Fon: +49 8341 908489-89 | Fax: +49 8341 908489-90 | info@spruehkopf.com